Card Racks |
Chassis mount card racks; 6 card slots on .500" centers. Pre-drilled mounting flange on bottom of rack. Racks are compatible with Douglas DE-1 and DE-3 series breadboards. 44-pin connectors, can be pop riveted to the backs of the racks and wired to form a mother board. Specify number of connectors desired when ordering.
For DE-1 series boards CR-6-DE-1 $21.20
For DE-3 series boards CR-6-DE-3 $21.20
STD compatible chassis mount racks; Card slots on .500" centers. Five card capacity when used with BX-DE-STD-5. Sic card capacity when used with 56-pin connectors riveted to back of cage. Can also be used with 44-pin connectors for compatibility with Douglas DE-6 series boards.
For DE-STD series boards CR-6-DE-STD $26.50
For DE-6 series boards CR-6-DE-6 $26.50
11.5" racks are available with slots on .500" centers or .750" centers. .500" version has 19 slots and the .750" version has 13 slots. Fully compatible with STD motherboard and the 44-pin motherboard. (19 slot capacity).
For DE-1 series boards on .500 centers CR-19-*-DE-1 $38.15; on .750 ctrs CR-13-*-DE-1 $38.15
For DE-3 series boards on .500 centers CR-19-*-DE-3 $38.15; on .750 ctrs CR-13-*-DE-3 $38.15
For DE-6 series boards on .500 centers CR-19-*-DE-6 $44.55; on .750 ctrs CR-13-*-DE-6 $44.55
For DE-STD series boards on .500 centers CR-19-*-DE-STD $44.55; on .750 ctrs CR-13-*-DE-STD$44.55
19" racks available with 34 slots on .500" centers or 23 slots on .750" centers. Specify 4.2" depth for DE-1 and DE-3 series boards, and 6.5" depth for DE-6 and DE-STD series. Available with 44-pin, .156" edge connectors or 56-pin, .125" edge connectors riveted to bottom of cage. Specify number of connectors desired.
For DE-1 series boards on .500 centers CR-34-*-DE-1 $42.50; on .750 ctrs CR-23-*-DE-1 $42.50
For DE-3 series boards on .500 centers CR-34-*-DE-3 $42.50; on .750 ctrs CR-23-*-DE-3 $42.50
For DE-6 series boards on .500 centers CR-34-*-DE-6 $47.75; on .750 ctrs CR-23-*-DE-6 $47.75
For DE-STD series boards on .500 centers CR-34-*-DE-STD $47.75; on .750 ctrs CR-23-*-DE-STD$47.75
*Flange option: (specify option number when ordering)
1. Standard flage (flush)
2. No flange
3. 1.5" Extended flange
4. 3" Extended flange
When ordering, specify
CR-34-4-DE-1
| | |
| | Board size; DE-1 or DE-3
| Flange option desired
Number of card positions desired
STD Card Rack & Motherboard
A six position card rack and mother board for use with STD boards. The card rack is fabricated from .060" black anodized aluminum and contains nylon card guides for electrically insulated card mounting of up to six STD circuit boards on .5" centers. Riveted to the card rack is a six position mother board which conforms to the STD standards for power and data lines. Heavy duty contacts are provided on the mother board for connection of power supply lines and a ground plane surrounds each data pin on the connector side of the board. The new rack allows very high density packing, with an overall height of only 3-1/8".
The new rack and mother board are sold together as part number BX-DE-STD-6AR for $125. Both the rack and mother board are also available individually.
BX-DE-STD-6AR (rack and mother board) $125.00
CR-6A-DE-STD (rack only) 36.50
BX-DE-STD-6A (mother board only) 88.50
the motherboards include the six installed connectors.
Douglas Electronics, Inc.
2777 Alvarado Street
San Leandro, CA 94577
USA
Voice: +1 510 483-8770
Fax: +1 510 483-6453
BBS: +1 510 483-6548
info@douglas.com
http://www.douglas.com
|
All trademarks are the property of their respective holders. © 1996 - 1999, Douglas Electronics, Inc. All Rights Reserved Please direct any questions or comments regarding this site to the Webmaster. |