Douglas Electronics Home Cad Software Professional System Upgrades Hardware PC/104 Breadboards BB Accessories Robotics Disk Duplicator Card Racks Services PCB Manufacturing Photoplotting File Translation Sheet Metal Request Literature Ordering Software& Support Custom PCB's Stock PCB's Stock Hardware Sheet Metal Tech Support Douglas History Contact Information	General Purpose Breadboards Type Description DE-1 Part# DE-3 Part# Price DE-1 and DE-3 Family - 44 contacts (22/side) on .156" centers - 4.2" Height 4.375" Width 4.5" Width   Diode Matrix 18 x 20 Diode Matrix; Plated-thru holes 3-DE-1 3-DE-3 $19.32 Discrete Single-sided board; fingers one side only 4-DE-1 4-DE-3 10.32 Extenders Bare board only 6-DE-1 6-DE-3 6.67 6-DE-1/3 as above with 44-156C-Y connector installed 6-DE-1-C 6-DE-3-C 13.85 16-pin DIPs 12 DIP positions; circuits on one side of board, gold-plated fingers on both sides, not plated-thru 11-DE-1 11-DE-3 12.32 11-DE-1/3 with ground plane on back side of board 11-DE-1-GP 11-DE-3-GP 12.32 Large DIPs 3 DIP rows of 60 pads, not plated-thru 12-DE-1 12-DE-3 12.32 12-DE-1/3 with ground plane on back side of board 12-DE-1-GP 12-DE-3-GP 12.32 Blanks Blank with gold plated fingers on both sides 18-DE-1 18-DE-3 10.92 Copper-clad both sides; gold fingers 19-DE-1 19-DE-3 10.92 Grids .200" grid with .067" holes (not plated-thru) 20-DE-1 20-DE-3 11.52 .100" grid with .038" holes (not plated-thru) 21-DE-1 21-DE-3 13.07 .100" grid with plated-thru holes 22-DE-1 22-DE-3 18.82 Mixed DIPs Plated-thru with pads and busses on each side; gold plated fingers 24-DE-1 24-DE-3 18.32 Wire-Wrap 5 DIP rows of 78 pads, not plated-thru 32-DE-1 32-DE-3 11.97 32-DE-1/3 with 20 16-pin wire-wrap sockets 32-DE-1-W 32-DE-3-W 39.97 Type Description Part# Price DE-4 Family - 72 contacts (36/side) on .156" centers 7.5" Height x 6.5" Width Extenders Bare board only 6-DE-4 $15.02 With connector installed 6-DE-4-C 20.79 16-pin DIPs 36 position dual in-line breadboard, not plated-thru 11-DE-4 31.97 With pins loaded 11-DE-4-P 114.77 With ground plane on component side 11-DE-4-GP 31.97 Large DIPs 5 dual rows of 120 pads; gold plated fingers both sides, not plated-thru 12-DE-4 32.02 Blanks Bare board with gold plated fingers on both sides of board; .038 holes 18-DE-4 18.72 board copper-clad on both sides; gold plated fingers with .038 holes 19-DE-4 18.72 DE-5 Family - 44 contacts (22/side) on .156" centers 7.5" Height x 6.5" Width Extenders Bare board only 6-DE-5 $13.07 With connector installed 6-DE-5-C 20.20 16-pin DIPs with 36 16-pin positions, 44-pin connector tab, not plated-thru 11-DE-5 30.52 Available with ground plane on back 11-DE-5-GP 30.52 Large DIPs 5 dual rows of 120 pads; gold plated fingers both sides, not plated-thru 12-DE-5 30.52 With ground place on back 12-DE-5-GP 30.52 Blanks Blank board with connector tab 18-DE-5 17.32 Copper-clad blank (both sides) 19-DE-5 17.32 Grid .100 grid; 65 x 62 .038 holes 21-DE-5 30.52 DE-6 Family - 44 contacts (22/side) on .156" centers 6.5" Height x 4.5" Width Extenders Bare board only 6-DE-6 $9.87 6-DE-6 with connector installed 6-DE-6-C 17.00 16-pin DIPs Twenty 16-pin positions, plated-thru holes 11-DE-6 18.87 Available with ground plane on back 11-DE-6-GP 18.87 Twenty five position breadboard with 44-pin connector tabs at each end, plated-thru holes 11-DE-66 20.20 Large DIPs Three dual rows of 100 pads, not plated thru 12-DE-6 18.87 Available with ground plane on back 12-DE-6-GP 18.87 Grids Available without pads on grid 21-DE-6 17.82 .038" holes on .100" grid; all holes plated-thru 22-DE-6 26.02 Mixed DIPs Twenty 16-pin positions with plated-thru holes, bussed on both sides of the board 24-DE-6 28.42 Wire-Wrap 18 rows of 39 holes, not plated-thru 32-DE-6 17.82
Douglas Electronics, Inc. 2777 Alvarado Street San Leandro, CA 94577 USA Voice: +1 510 483-8770 Fax: +1 510 483-6453 BBS: +1 510 483-6548 info@douglas.com http://www.douglas.com
All trademarks are the property of their respective holders. © 1996 - 1999, Douglas Electronics, Inc. All Rights Reserved Please direct any questions or comments regarding this site to the Webmaster.