22-DE-104 |
The 22-DE-104 prototyping kit fills the entire surface of a standard PC/104 form-factor with a grid of 0.070" pads with 0.038" plated-through holes on 0.100" centers, except for the area reserved for mounting-holes and connectors. The P1/J1, P2/J2, power connector and two standard 0.600" plastic spacers (for stacking the PC/104 modules) are included in the kit which is suitable for either 8-bit or 16-bit module designs. There is a Vcc plane on the component side of the board, and a Ground plane on the solder side. Vdd, +12v and -12v connections are also integrated into this double-sided design. The 0.038" holes will accept standard IC sockets or WireWrap pins for quick, easy prototyping. The circuit board measures 3.550" x 3.775".
| Base Part# | Extension Part# (description) |
Price |
Quantity Discounts | |||||||
| 5+ | 10+ | 25+ | 50+ | 100+ | 250+ | 300+ | 400+ | |||
| 22-DE-104 | K (kit) | $110.00 | 93.5 | 81.5 | 72.5 | 64.00 | 59.50 | contact Douglas | ||
| B (bare board) | 60.00 | 51.00 | 44.50 | 39.50 | 35.00 | 32.50 | contact Douglas | |||
Douglas Electronics, Inc.
2777 Alvarado Street
San Leandro, CA 94577
USA
Voice: +1 510 483-8770
Fax: +1 510 483-6453
info@douglas.com
http://www.douglas.com
|
All trademarks are the property of their respective holders. © 1996 - 2008, Douglas Electronics, Inc. All Rights Reserved Please direct any questions or comments regarding this site to the Webmaster. |