6A-DE-63/104 |
The 6A-DE-63/104 allows 8 or 16-bit PC/104 modules to be used completely inside an ISA box. When installed, the top edge of the PC/104 module is flush with the top of the 6A-DE-63/104 board. The board is 6.300" x 4.200" and comes fully assembled, including connectors, four spacers, and a bracket. It is also available as a bare-board.
The 6A-DE-63/104 can be used with a BX-DE-63-2 to allow ISA boards to be connected to a PC/104 stack (substitute the 6-DE-63/104-LB to connect ISA boards to a Little Board).
The PC/104 socket is on the component side of the 6A-DE-63/104. Plugging in a PC/104 board puts the solder side of the PC/104 against the component side of the 6A-DE-63/104.
Note: A similar board 6-DE-63/104 is also available for testing and debugging a PC/104 board, raising the PC/104 stack above others on an ISA bus and allowing access to both sides of a PC/104 card. This 6A-DE-63/104 is more commonly used in "finished applications" where easy access to the PC/104 board is not required.
| Base Part# | Extension Part# (description) |
Price |
Quantity Discounts | |||||||
| 5+ | 10+ | 25+ | 50+ | 100+ | 250+ | 300+ | 400+ | |||
| 6A-DE-63/104 | C (assembled) | $178.00 | 151.50 | 131.50 | 117.50 | 103.00 | 96.00 | 89.00 | contact Douglas | |
| K (kit) | 150.00 | 127.50 | 111.00 | 99.00 | 87.00 | contact Douglas | ||||
| B (bare board) | 100.00 | 85.00 | 74.00 | 66.00 | 58.00 | contact Douglas | ||||
Douglas Electronics, Inc.
2777 Alvarado Street
San Leandro, CA 94577
USA
Voice: +1 510 483-8770
Fax: +1 510 483-6453
BBS: +1 510 483-6548
info@douglas.com
http://www.douglas.com
|
All trademarks are the property of their respective holders. © 1996 - 1999, Douglas Electronics, Inc. All Rights Reserved Please direct any questions or comments regarding this site to the Webmaster. |